Experience about blackboard / internet learning good for scholarship

Our center has received a lot of questions asked of you from all over the country to ask our center a question. Receive full scholarships to study abroad is the dreams and goals of people. The honor received 2 scholarship of Government: ADS of the Australian Government and the US Government’s Fulbright, the master wants to share the same experience with his experience with you so that you can turn your dreams into reality like the master. Our center will share with you the process of preparation to be able to apply to two specific scholarship program is the ADS and the most effective ways a Fulbright. Note This is a difficult time and long process.

Step 1: consult the list of disciplines be granted scholarships

The first is that you have to refer to the view of his profession and field of study are available in the list of disciplines are awarded a scholarship or not. You can view the list of occupations on the Timeline of the master. If not, you may have to search for scholarships by the University, this requires you to be got by the search on the Internet or on the website of the school.

Reference: Top 20 E-Learning and Blackboard training institutions in the USA

Step 2: Reach 7.0 minimum GPA

For the student, if you dream of getting the full scholarship, then strive to achieve good academic GPA minimum is the new 7.0 eligibility apply. However, I note that you have to understand is that GPA is only the condition need not be sufficient conditions to be able to get a scholarship. So that the Government’s scholarship programs to encourage more people to join in with the defined GPA just from 7.0 and above are eligible to apply. Longer to truly receive the scholarship process is the long and difficult period of striving, not simply have GPA “beautiful”!

Step 3: the minimum IELTS 6.5 or TOEFL iBT 79

Standard English as a compulsory requirement is on scholarship for ADS and Fulbright. All are round the English ability of the candidate. Therefore, you must invest in English 1 is really serious to be able to achieve that standard program. Whether you’re good at to whichever poor English, but you still may not get the chance. If anyone needs to cultivate English, especially IELTS, you can contact Our center, Our center will help you to learn the way to master.

Step 4: must have at least 2 years working experience

So many of you “impatient” to want a scholarship immediately after graduating from the University, this is not possible for 2 this scholarship program. The scholarship program is required, and you are only allowed to apply his trades are working properly, note they do not apply to the fruit industry. If getting scholarships, you have to be sent for approval by the governing body. If not, you will not receive a scholarship.

For you have, and note, the Government scholarship program has provided scholarships for oriented blocks of State agencies, here are their priority policies. However, that does not mean you work outside of that block is no opportunity, you can contact directly his view may apply. The master has friends outside the state block can still receive the scholarship.

Step 5: Please make written letters of recommendation

This is a very difficult job for most of the candidates when applying for scholarships. Therefore, you have to start the search, familiar, and build the good relationship with someone that you know in the process of studying and working, and then eventually they consent to help yourself by writing a letter of recommendation. Of course, the person must have the degree and the higher the position of the letter they have weight. There is no general formula for this, each person has different strengths in searching. Even, this may be the key to helping you open the door to “dream”.

There are 5 things you have to started to do from now on so that when the opportunity is eligible to apply. You can reference more information on the Timeline of the master.

Windows 10 anniversary update quickly

5 ways to download Anniversary Update for Windows 10
1. Upgrade through Windows Update:
Step 1: Click the Start button in the bottom left corner of the screen, select Settings.


Step 2: Next click on Update & security.


Step 3: Then click on the Windows Update tab, then look to the right pane and click on Check for Updates to ask your computer to scan for the latest update. If a new version is downloaded and installed automatically. Installation usually takes 15-30 minutes depending on the device.


Step 4: After the update, click Restart Now to restart the computer.

2. Upgrade directly:
Step 1: Download the Media Creation Tool on your machine, launch it up and click the Accept option to accept the terms of service that the manufacturer offers.


Step 2: When the What do you want to do window? Appears, tick the box under Upgrade this PC now, then click Next.


Step 3: Right after that, this tool will download Anniversary Update update for Windows 10.


Step 4: The download is complete, you will be taken to the Ready to install section. Now make sure the Keep personal files and apps option is selected. Or click on Change what to keep, select Keep personal files and apps. Then click Install to begin the installation process on your computer.


Step 5: Restart the computer for the update to take effect.

3. Upgrade with “bait” packets:
First, visit Microsoft’s Windows 10 Upgrade Web site. Then click the Upgrade Now option. Soon after that will download a file, you just launch it that the update process will take place automatically.


4. Download on Windows Insider Program:
If your version is Windows 10 Build 14393.x or higher, then follow the steps below to download the Anniversary Update:

Step 1: Open Settings, then click on Update & Security.

Step 2: Next select the Windows Insider Program, then click the Stop Insider Preview builds button.


Step 3: When the window Want to take a break? Appears, click on link Need to stop getting Insider builds completely?


Step 4: Next to Confirm.

Step 5: Finally click on Restart Now to complete the update process.

5. Download the ISO file:
If you want to install a new Windows 10 Anniversary Update with ISO file then follow the steps below:

Step 1: Download the Media Creation Tool on your machine, launch it. When the window What do you want to do? Appears in the Create installation media for another PC box. Then click Next.


Step 2: Next, select the version, language and platform structure of Windows 10, then click Next.


Step 3: The Choose which media to use window appears, select the ISO file, and then click Next.


Step 4: Soon, you will be asked to specify the name and location of the downloaded ISO packet. Wait a moment for the ISO load and initialization process to complete, the loading process is fast or slow depending on your computer configuration.


Step 5: When the download is finished, select Open DVD Burner, then click Finish.


Step 6: Insert the DVD and hit Burn.


Hopefully this article will help you quickly get Anniversary Update update, to easily experience the useful features that this latest operating system brings.
You can refer to the article below to update the information :

How to dial PPPoE on the TP-Link device

Set the parameters of the modem
Here I am a new purchase and no change so I will use the default address is


Press Enter and a login window will appear. By default, username and passoword will be admin, then click on Login to start configuration.


Next click Interface Setup and select PVCs Summary


You notice each PVC will have two parameters is VPI and VCI, each operator will have VPI and VCI parameters separately. It is best to contact the provider to inquire about these two parameters.

If no PVC has the VPI and VCI parameters coincide with the requirements of the network provider you can change any parameters of PVC.

In this example we need VPI of 8 and VCI of 35 so we will choose PVC4. Now close this window and set up modem 2 parameters you just watched.



TP-Link installation and configuration instructions can be referenced :

In the Virtual Circuit you choose PVC4, your VPI and VCI will change.

Next at Encapsulation you choose PPPoE / PPPoA

Next, at the PPPoE / PPPoA part you log in with the username and password provided by the network provider. If you do not know these two parameters then please contact the network to provide them again.


Next click Save to save.

Tip: If you want to change the Anderss Modem IP address then click on LAN to change the necessary configuration parameters such as change IP Address for Modem, configure DHCP service, assign fixed DNS to modem. Finally choose Save to save the changed parameters.

Changing the name and password for Tenda router

Here are the steps to configure wifi tenda that you can manipulate :

I. Installation instructions on the new interface:

– Step 1: Plug in the wifi transmitter -> attach one end of the cable to the yellow port of the wifi transmitter, the other end plugs into the computer.

– Step 2: Open the Web browser (Chrome, Firefox, IE, Safari, Opera) -> type in address: and press Enter.

– Step 3: Enter the “admin” password and click OK.


– Step 4: Select “DHCP” and enter the WiFi password you want to put in “Security Key” (only 8 characters), then click OK.


– Step 5: Click “Advanced” to change the name of WiFi. Click “Wireless” -> enter a new name in the “SSID” -> click OK to save.


Step 6: Installed -> now pull the cable from the computer plugged into the modem port -> pull up the plug on the yellow port of the wifi transmitter plugged in through the green port -> finished.

The article you can refer to the following :

II. Installation instructions on the old interface:

– Step 1: Plug in the wifi transmitter -> attach one end of the cable to the yellow port of the wifi transmitter, the other end plugs into the computer.

– Step 2: Open the Web browser (Chrome, Firefox, IE, Safari, Opera) -> type in address: and press Enter.


– Step 3: Choose Advance Settings

In the installation interface -> select WAN settings -> in frame Mode -> select DHCP -> click OK


Step 4: Change the Name for WiFi -> Select Wireless settings -> select Wireless Bacsic Settings

At the SSID frame -> rename the wifi -> click OK


Step 5: Change Password for wifi -> select Wireless Security

In the Key -> reset the new password -> click OK


Step 6: Installed -> now pull the cable from the computer plugged into the modem port -> pull up the plug on the yellow port of the wifi transmitter plugged in through the green port -> finished.

– To change Password repeat steps 2 and 4

Fixed a bug that failed to access the application, Store on Windows 10

How to fix a failed application?

First you need to show the hidden folder by clicking View and tick the Hidden items box as shown below :


OK, now you open This PC and go to the following link :

C: \ Users \ <Your hostname> \ AppData \ Local \ Packages \

For example, if I fail to open the Microsoft Edge application, I will copy the folder name :


Note only copy the first paragraph, the miscellaneous numbers do not get back. In the example above will copy: Microsoft.MicrosoftEdge and paste somewhere like Notepad for example.

Press the Windows button and enter cmd, right click on it and select Run as Administrator.


When entering the Command Promt, enter the following command:

PowerShell -ExecutionPolicy Unrestricted -Command “& {$ manifest = (Get-AppxPackage Microsoft.WRITE APP’S ID HERE) .InstallLocation + ‘\ AppxManifest.xml’; Add-AppxPackage -DisableDevelopmentMode -Register $ manifest ”

Replace Microsoft.WRITE APP’S ID HERE with Microsoft.MicrosoftEdge and press Enter.

Wait for a message will be successful and you try to open the application is not offline.


Some common Windows 10 errors

The articles you can refer to :

Fixed a bug that failed to get to the Windows Store of Windows 10:

  • PowerShell -ExecutionPolicy Unrestricted -Command “& {$ manifest = (Get-AppxPackage Microsoft.Microsoft.WindowsStore) .InstallLocation + ‘\ AppxManifest.xml’; Add-AppxPackage -DisableDevelopmentMode -Register $ manifest “

Fixed a bug that failed to get into Windows Photos 10 :

  • PowerShell -ExecutionPolicy Unrestricted -Command “& {$ manifest = (Get-AppxPackage Microsoft.Windows.Photos) .InstallLocation + ‘\ AppxManifest.xml’; Add-AppxPackage -DisableDevelopmentMode -Register $ manifest “

Fixed a bug where Cortana could not be opened on Windows 10 :

  • PowerShell -ExecutionPolicy Unrestricted -Command “& {$ manifest = (Get-AppxPackage Microsoft.Windows.Cortana) .InstallLocation + ‘\ AppxManifest.xml’; Add-AppxPackage -DisableDevelopmentMode -Register $ manifest “

If you have a problem with Windows 10 can not open any application, enter the corresponding name in accordance with the instructions above.

Restore original settings for windows 10

Often, when a computer crashes or gets infected with a virus that is nearly impossible for the user, many people will immediately think of the most powerful method – reinstall the entire operating system via the available ghosts, or Windows installer.

However, from now on, you can forget the feeling of depression when you install the ghost or install a new operating system, because Windows 10 has a pretty useful feature that is bringing the whole system back to the set. Original manufacturer’s original.

And the operation to do this is very simple, just follow the instructions below.

First, open the Settings application in the Start menu, or use Windows + I.


Next, click Update and Security in the Settings interface that appears.
Then, in the Update and Recovery section, click the Recovery option in the options area to the left of the interface, and then click the Get start button of the Reset this PC area.

Recovery interface in Update and Security.
At this point, the Choose an option window will appear and give you the following two options
– Keep my file: Keep all your personal files and delete everything else like the application, and reinstall the original configuration.

– Remove everything: The system will delete everything, including personal files.

If you click Keep my file, the system will display the list of applications you installed and then remove all applications.
However, Windows automatically saves these applications in a folder and leaves the desktop after the restore is complete.


You can refer to the articles below for more information on this issue :

In case you click Remove everything, if your computer has more than one drive, the system will display two other options: Only the drive where Windows is installed (only delete data on the Windows installation drive) and All drivers (erase all drive data).


Next, the system will display two more options, but you should select Just remove my files to be able to quickly restore the operating system.


At this point, the system will display a list of Windows restore jobs that will appear, and then press the Reset button to begin the process.

From now on, the rest of you will just wait a bit for Windows to proceed to restore the manufacturer’s original settings.