Changing the name and password for Tenda router

Here are the steps to configure wifi tenda that you can manipulate :

I. Installation instructions on the new interface:

– Step 1: Plug in the wifi transmitter -> attach one end of the cable to the yellow port of the wifi transmitter, the other end plugs into the computer.

– Step 2: Open the Web browser (Chrome, Firefox, IE, Safari, Opera) -> type in address: 192.168.0.1 and press Enter.

– Step 3: Enter the “admin” password and click OK.

1

– Step 4: Select “DHCP” and enter the WiFi password you want to put in “Security Key” (only 8 characters), then click OK.

2

– Step 5: Click “Advanced” to change the name of WiFi. Click “Wireless” -> enter a new name in the “SSID” -> click OK to save.

3

Step 6: Installed -> now pull the cable from the computer plugged into the modem port -> pull up the plug on the yellow port of the wifi transmitter plugged in through the green port -> finished.

The article you can refer to the following :

II. Installation instructions on the old interface:

– Step 1: Plug in the wifi transmitter -> attach one end of the cable to the yellow port of the wifi transmitter, the other end plugs into the computer.

– Step 2: Open the Web browser (Chrome, Firefox, IE, Safari, Opera) -> type in address: 192.168.0.1 and press Enter.

4

– Step 3: Choose Advance Settings

In the installation interface -> select WAN settings -> in frame Mode -> select DHCP -> click OK

5

Step 4: Change the Name for WiFi -> Select Wireless settings -> select Wireless Bacsic Settings

At the SSID frame -> rename the wifi -> click OK

6

Step 5: Change Password for wifi -> select Wireless Security

In the Key -> reset the new password -> click OK

7

Step 6: Installed -> now pull the cable from the computer plugged into the modem port -> pull up the plug on the yellow port of the wifi transmitter plugged in through the green port -> finished.

– To change Password repeat steps 2 and 4

Fixed a bug that failed to access the application, Store on Windows 10

How to fix a failed application?

First you need to show the hidden folder by clicking View and tick the Hidden items box as shown below :

1

OK, now you open This PC and go to the following link :

C: \ Users \ <Your hostname> \ AppData \ Local \ Packages \

For example, if I fail to open the Microsoft Edge application, I will copy the folder name :

2

Note only copy the first paragraph, the miscellaneous numbers do not get back. In the example above will copy: Microsoft.MicrosoftEdge and paste somewhere like Notepad for example.

Press the Windows button and enter cmd, right click on it and select Run as Administrator.

3

When entering the Command Promt, enter the following command:

PowerShell -ExecutionPolicy Unrestricted -Command “& {$ manifest = (Get-AppxPackage Microsoft.WRITE APP’S ID HERE) .InstallLocation + ‘\ AppxManifest.xml’; Add-AppxPackage -DisableDevelopmentMode -Register $ manifest ”

Replace Microsoft.WRITE APP’S ID HERE with Microsoft.MicrosoftEdge and press Enter.

Wait for a message will be successful and you try to open the application is not offline.

4

Some common Windows 10 errors

The articles you can refer to :

Fixed a bug that failed to get to the Windows Store of Windows 10:

  • PowerShell -ExecutionPolicy Unrestricted -Command “& {$ manifest = (Get-AppxPackage Microsoft.Microsoft.WindowsStore) .InstallLocation + ‘\ AppxManifest.xml’; Add-AppxPackage -DisableDevelopmentMode -Register $ manifest “

Fixed a bug that failed to get into Windows Photos 10 :

  • PowerShell -ExecutionPolicy Unrestricted -Command “& {$ manifest = (Get-AppxPackage Microsoft.Windows.Photos) .InstallLocation + ‘\ AppxManifest.xml’; Add-AppxPackage -DisableDevelopmentMode -Register $ manifest “

Fixed a bug where Cortana could not be opened on Windows 10 :

  • PowerShell -ExecutionPolicy Unrestricted -Command “& {$ manifest = (Get-AppxPackage Microsoft.Windows.Cortana) .InstallLocation + ‘\ AppxManifest.xml’; Add-AppxPackage -DisableDevelopmentMode -Register $ manifest “

If you have a problem with Windows 10 can not open any application, enter the corresponding name in accordance with the instructions above.

Restore original settings for windows 10

Often, when a computer crashes or gets infected with a virus that is nearly impossible for the user, many people will immediately think of the most powerful method – reinstall the entire operating system via the available ghosts, or Windows installer.

However, from now on, you can forget the feeling of depression when you install the ghost or install a new operating system, because Windows 10 has a pretty useful feature that is bringing the whole system back to the set. Original manufacturer’s original.

And the operation to do this is very simple, just follow the instructions below.

First, open the Settings application in the Start menu, or use Windows + I.

1

Next, click Update and Security in the Settings interface that appears.
Then, in the Update and Recovery section, click the Recovery option in the options area to the left of the interface, and then click the Get start button of the Reset this PC area.

2
Recovery interface in Update and Security.
At this point, the Choose an option window will appear and give you the following two options
– Keep my file: Keep all your personal files and delete everything else like the application, and reinstall the original configuration.

– Remove everything: The system will delete everything, including personal files.

3
If you click Keep my file, the system will display the list of applications you installed and then remove all applications.
However, Windows automatically saves these applications in a folder and leaves the desktop after the restore is complete.

4

You can refer to the articles below for more information on this issue :

In case you click Remove everything, if your computer has more than one drive, the system will display two other options: Only the drive where Windows is installed (only delete data on the Windows installation drive) and All drivers (erase all drive data).

 

5
Next, the system will display two more options, but you should select Just remove my files to be able to quickly restore the operating system.

6

At this point, the system will display a list of Windows restore jobs that will appear, and then press the Reset button to begin the process.

7
From now on, the rest of you will just wait a bit for Windows to proceed to restore the manufacturer’s original settings.

8

How to setup windows 10 by upgrade free

According to information from Microsoft, the company seeks to “trick” Windows users to use the support technology to be able to continue to update and experience the new features available on Windows 10 Anniversary version.

So if you are wondering about the free update to Windows 10 or even the latest update to Windows 10 Anniversary, you can apply the following simple method.

First, visit the “Windows 10 free upgrade for customers who use assistive technologies” page to download the update support tool.

1
Website download tool supports Windows 10 update.
Similar to previous operating system updates, this method can only work on computers that have Windows 7 or 8.1 installed. Therefore, if you are using Windows 8, you must update to Windows 8.1, then update to Windows 10.

Next at the main interface of the page, click Update Now button. At this time, the site will download applications that support upgrades to Windows 10 (Windows 10 Update Assistant).

Once the download is complete, you continue to launch this application, then continue to follow the instructions provided by the application.

2
The main interface of the Windows 10 Update Assistant application.
From now on, after the update is complete, your device will run the Windows 10 operating system with a digital license provided by Microsoft. Thanks to that, you can reinstall this operating system whenever you want without having to worry about copyright.

The article can refer :

Fix sound problems on windows

1. Restart your Windows 10 computer
In many cases the simplest way to fix Windows 10 errors is to restart your Windows computer. Note before restarting your Windows 10 computer, save all the documents you are doing and close all open applications.

After the boot process is finished proceed to connect the USB drive to your computer.

2. Disconnect the computer’s power supply and reconnect it after 15 minutes
This solution sounds silly, but in some cases it can help you troubleshoot USB device failure.

To disconnect the computer’s power source, first turn off your computer, then unplug the power outlet. Wait 10 to 15 minutes, then power on, turn on your computer, and reconnect the USB thumb drive to see if the problem has been fixed.

3. Connect the USB drive to another port
This is just a temporary solution. If a “USB device not recognized” error occurs during the USB drive connection, you can connect the USB drive to another port to see if the problem is fixed.

4. Update the USB driver
Step 1 :
Open Device Manager by right-clicking the Start button and then clicking on Device Manager.

Step 2 :
Expand Universal Serial Bus and check for any unknown USB devices. If you see an unspecified USB device, right-click it, click Update Driver Software, and then click Search automatically for updated driver software so that Windows 10 automatically downloads and installs the latest driver.

1

5. Update Generic USB Hub driver
Step 1 : Open Device Manager by right-clicking on the Start button and selecting Device Manager. Then expand the Universal Serial Bus to see if there are one or more Generic USB Hubs.

Step 2 : Right-click on the first Generic USB Hub line (if there are multiple Generic USB Hubs), then click Update Driver Software => Browse my computer for driver software. Generic USB Hub then click Next.

2

 

3

4

5

Wait until the message “Windows has successfully updated your driver software” appears on the screen.

6

6. Reinstall the USB driver
Note:

Before re-installing the USB driver, you should create a system restore point or backup image in case you get a driver installation error on your Windows 10 machine. .

– Open Device Manager. To do this, follow the steps below:

Press the Windows + R key combination to open the Run command window.

On the Run command window, enter devmgmt.msc and press Enter.

– Next on the Device Manager window, expand Disk Drives.

Right-click on External USB 3.0 Disk, then select Uninstall.

7

– Next expand Universal Serial Bus Controllers.

Right-click the USB Mass Storage Device and select Uninstall. Also you can uninstall any unnamed USB device (Unknown USB Device) from this list.

8

– From the Action Menu, select Scan for hardware changes.

9

– After the scan finishes, open up Windows Explorer and find your USB drive is connected.

If the Not Recognized error still occurs, then proceed to open the Device Manager again and update the USB driver. To do this thing:

– Expand Disk Driver.

Right-click your USB 3.0 drive, then select Update Driver Software.

10

Wait for Windows to automatically find the latest driver version for your USB 3.0.

– Do the same to update the USB Mass Storage Device driver.

11

Once completed, check whether your USB 3.0 has been received or not.

You can read more useful articles here.

Windows 8.1 activation key steps

Key Win 8.1 that Phanmemaz.com shared in this article will help you activate the genuine Windows 8.1 license. Previously I used the tool active win 8.1, however it always find hidden danger when using pirated. So you and my friends regularly collect Windows 8.1 Product Key to use. User evaluation after activation is running smoothly, less error as when using the tool. When running the tool, the 3rd party software interferes with it, we do not know if it runs in the background. If you just reinstalled this operating system then use the key in the list below to active offline.

Key-Win-8-1

Not everyone can afford to buy a Windows 8.1 key directly from Microsoft or resellers. In part because of the high price, the other is the form of payment is not appropriate so the majority of users choose the solution using KMSPico to activate the copyright.

As you know, from Windows 8 onwards, Microsoft requires the installation key, then the activation key. When installing Win 7, just ignore and activate after installation, so you must save key setup somewhere to enter during the Install process.

Key Win 8.1 latest 2016

Key settings :

  • Core: 334NH-RXG76-64THK-C7CKG-D3VPT
  • Professional: XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB
  • Enterprise: MNDGV-M6PKV-DV4DR-CYY8X-2YRXH

Windows 8.1 Product Key

  • Q4NBQ-3DRJD-777XK-MJHDC-749T7
  • 2VTNH-323J4-BWP98-TX9JR-FCWXV
  • D7KN2-CBVPG-BC7YC-9JDVJ-YPWXV
  • MMRNH-BMB4F-87JR9-D72RY-MY2KV
  • N4WY8-DVW92-GM8WF-CG872-HH3G7
  • ND8P2-BD2PB-DD8HM-2926R-CRYQH
  • CDQND-9X68R-RRFYH-8G28W-82KT7
  • DWV49-3GN3Q-4XMT7-QR9FQ-KKT67
  • F2M4V-KFNB7-9VVTW-MVRBQ-BG667
  • T3NJK-3P683-2T7BJ-2X27F-8B2KV
  • HB39N-V9K6F-P436V-KWBTC-Q3R9V
  • 6PN82-R4BBH-XX8K2-DCK84-VMFDH
  • QGR4N-78PMD-KCRQ7-83BXT-YG667
  • 3FCND-JTWFM-24VQ8-QXTMB-TXT67
  • GX9N8-4H2FH-D987T-BQ9GK-XKT67
  • BDDNV-BQ27P-9P9JJ-BQJ96-KTJXV
  • CDQND-9X68R-RRFYH-8G28W-82KT7
  • DWV49-3GN3Q-4XMT7-QR9FQ-KKT67
  • KKPMN-469HY-H6V43-T8VX2-8W8XV
  • 4NMMK-QJH7K-F38H2-FQJ24-2J8XV
  • 84NRV-6CJR6-DBDXH-FYTBF-4X49V
  • 3NHJ7-3WWQK-4RFTH-8FHJY-PRYQH
  • 988NM-XKXT9-7YFWH-H2Q3Q-C34DH
  • TGXN4-BPPYC-TJYMH-3WXFK-4JMQH
  • N9C46-MKKKR-2TTT8-FJCJP-4RDG7
  • Q4NBQ-3DRJD-777XK-MJHDC-749T7
  • GCRJD-8NW9H-F2CDX-CCM8D-9D6T9
  • HMCNV-VVBFX-7HMBH-CTY9B-B4FXY
  • MHF9N-XY6XB-WVXMC-BTDCT-MKKG7
  • TT4HM-HN7YT-62K67-RGRQJ-JFFXW
  • 334NH-RXG76-64THK-C7CKG-D3VPT
  • XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB
  • MNDGV-M6PKV-DV4DR-CYY8X-2YRXH
  • FHQNR-XYXYC-8PMHT-TV4PH-DRQ3H
  • NTTX3-RV7VB-T7X7F-WQYYY-9Y92F

3

When you have finished installing Win 8.1, you will see that Windows is not activated, which means that there is no license. Use Key Win 8.1 above to activate. Not all serial key is so you have to try to see which one is used.

Here are some Key Win 8.1 that I have tested quite effectively at the time of writing. If you are concerned about using the Active tool, then choose this genuine solution. Hopefully, that will help somewhat of your need to experience this operating system.

The related articles you can refer to here.

Laparoscopic disk herniation:

Laparoscopic disk herniation:

For patients with severe stage disc herniation, which can not be treated with high frequency waves, physicians may apply a laparoscopic method to remove the disc.

“The special thing of this colonoscopy is that soon after the surgery, both the physician and the BV can go out for pho,” said Dr. Thach.

A herniated disc herniation causes the person to be very painful on one leg, or both on both legs, where the patient may not be able to walk. Sometimes after a strong impact such as sneezing, coughing hard patients hard can not go anymore. Previously for the treatment of open surgery, a general anesthetic or local anesthetic, when the doctor intervenes, touches the nerves of both doctors and patients do not know. Only after the surgery, patients with hemorrhage paralysis to know the operation to leave sequelae. Especially with open surgery will destroy the entire structure of the spine, skeletal muscle so the spine is affected, relapses quickly.

In addition to laparoscopic surgery, the patient is given local anesthetic and complete local anesthesia to have complete control over the operation. Just touch the nerve, the pain will tell the doctor immediately should reduce the risk of complications.

Since 2008 Viet Duc Hospital has performed about 500 laparoscopic surgery and showed many outstanding advantages. The patient is completely controlled, has control of the operation, after the operation, the length of hospital stay is short, limited complications (without bleeding) due to a small incision 1 cm with hot tub with finger, numb at Place, keep it in place of the hernia. As a result, the spinal structure is not affected, thus destroying the possibility of recurrence.

Get a little invasive hernia:

Getting a little invasive hernia is also a progressive surgical approach in the world. By replacing the open-eye operation with a new one with a light bulb (1.5 cm in diameter), it is easy for the tube to be placed in the hernia to retrieve the hernia. This method is applicable to patients who can not intercede with laparoscopy. The use of this method is similar to endoscopy because through the tube diameter is small, so the structure of the spine is less damaged, less damaged so it does not affect the spine.

Replacement of the spinal prosthesis:

Previously, in patients with late-onset spinal disc herniation, the intervention was discontinued by discarding the damaged disc and replaced with a disc (or fragment) Hardened, welded two vertebrae together. Thus, the movement of the patient is limited and there is a danger of damaging the adjacent discs more quickly.

But with the method of disc replacement, the patient can still perform the usual flexible movements such as with normal disc. After replacing the artificial disks, the patient can still bend, swivel, turn left, lean right. This method was first implemented in Vietnam in 2009 by the doctors Viet Duc hospital. So far, this technique has successfully applied to hundreds of patients.

 

Read more: Laser spine surgery